T-202 is a Brass Plated Stamped Steel large flush mounted draw bolt. This style of latch was commonly seen on large trunks and boxes. One was located on each side of the trunk's lock. The overall measurements are 5-1/8"high by 2-15/16"wide. Being flush mounted means that the lock is install on the surface on the trunk and does not need to be recessed. Special care needs to be taken when marking the lid and bottom of the trunk to ensue that the two pieces of the latch line up correctly when installed. To make this process easier, a tip is to lay your trunk on it's back to place and mark the holes on the latch to make it easier.